ERA vocabulary
Vocabulary defined by the European Union Agency for Railways to describe the concepts and relationships related to the European railway infrastructure and the vehicles authorized to operate over it.
Net Element
Base class for defining nodes in the connectivity graph representing the topological network.
Net Relation
Base class for defining edges in the connectivity graph representing the topological network.
National Railway Line
Railway line within a member state.
Line Reference
A reference to a specific national railway line.
Operational Point
An operational point (OP) means any location for train service operations, where train services may begin and end or change route, and where passenger or freight services may be provided; operational point also means any location at boundaries between Member States or infrastructure managers.
Section Of Line
A section of line means the part of line between adjacent operational points and may consist of several tracks.
Track
A running track that is used for train service movements.
Tunnel
A railway tunnel is an excavation or a construction around the track provided to allow the railway to pass for example higher land, buildings or water.
Vehicle Type
A vehicle type that has been authorized to operate on the EU railway infrastructure.
Vehicle
A specific vehicle or wagon able to operate over railway lines.
Signal
A railway signal is an installation next to the railway track for signalling the maximum allowed speed in the next block section to the train driver.
Platform
Platform for the purpose of RINF is understood as a platform edge. A platform concerns only the part of the structure neighbouring to the track (interfaced with trains).
Contact Line System
System that is used to transmit electrical energy to road or rail vehicles.
ETCS Level
ERTMS / ETCS application level related to the track side equipment.
Train Detection System
System used to detect the position of vehicles in the railway track.
Siding
Sidings are all those tracks where running trains in service movements ends and which are not used for operational routing of a train.
Manufacturer
A company or organization that manufactures vehicles.
Vehicle Keeper
A company or organization that owns or operates a certain vehicle.
has implementation
Property that links a topological abstraction entity with its physical representation.
has abstraction
Property that links a physical entity with its topological abstraction representation.
operational point type
Indicates the type on an operational point.
section of line nature
Indicates the nature of a section of line.
line national ID
Related national railway line.
line referece
Indicates a relationship with a national railway line at a specific kilometer point.
start location
References the geolocation of the start of a tunnel.
end location
References the geolocation of the end of a tunnel.
passes through tunnel
References a tunnel that a track goes through.
vehicle category
Vehicle category.
vehicle subcategory
Vehicle subcategory.
manufacturer
Vehicle manufacturer company.
in country
Indicates the country in which an entity resides.
manufacturing country
Indicates the country in which a vehicle or vehicle type is manufactured.
authorized country
Indicates the country(ies) in where a vehicle type has been authorized to operate.
vehicle type
Indicates the vehicle type of a specific vehicle or wagon.
operational restriction
Indicates an operational restriction of vehicle or wagon.
vehicle keeper
Indicates the organization that owns/operated a vehicle or wagon.
element part
References the topology object of a higher-granularity level which contains a lower-granularity topology object.
has signal
References a signal associated with a topology object.
element A
References the first topological object in an oriented relation.
element B
References the second topological object in an oriented relation.
navigability
Indicates the navigation possibilities between two related topological objects.
net element
References an associated topological object.
position on A
Determines the position of the topological object A in a relation.
position on B
Determines the position of the topological object B in a relation.
declaration of verification SRT
Unique number for EC declarations concerning requirements of SRT (Safety in Railway Tunnels) TSI for infrastructure system.
declaration of verification INF
Unique number for EC declarations concerning requirements of INF (INFrastructure) TSI.
declaration of verification ENE
Unique number for EC declarations concerning requirements of ENE (ENErgy subsystem) on the specific track.
declaration of verification CSS
Unique number for EC declarations concerning requirements of CSS (Command - Control and Signalling subsystem) on the specific track.
declaration of demonstration SRT
Unique number for EI declarations concerning requirements of SRT (Safety in Railway Tunnels) TSI for infrastructure system.
declaration of demonstration INF
Unique number for EI declarations concerning requirements of INF (INFrastructure) TSI.
declaration of demonstration ENE
Unique number for EI declarations concerning requirements of ENE (ENErgy subsytem) on the specific track.
contact line system
Contact line system present in the section of line.
etcs level
ETCS level available in the section of line.
train detection system
Train detection systems installed in the section of line.
track
Reference to a related railway track.
platform
Reference to a related platform.
siding
Reference to a related siding.
OP start
Operational Point at the start of a Section of Line.
OP end
Operational Point at the end of a Section of Line.
track direction
Track normal running direction.
not applicable
Reference to a property that is not applicable.
not yet available
Reference to a property that is not yet available.
unique operational point id
Code composed of country code and alphanumeric operational point code, as defined in RINF.
TAF/TAP code
Primary code developed for TAF/TAP.
track gauge changeover facility type
Type of track gauge changeover facility.
length
Length of a physical object.
alternative name
Alternative name of a vehicle.
tsi compliant
Indicates if a certain property is TSI compliant.
type version number
Serial number that identifies a vehicle type.
vehicle number
Identification number of a vehicle or wagon.
vehicle series
Manufacturing series of a vehicle.
kilometer
Distance measured in kilometers from the origin of a national railway line.
start intrinsic coordinate
Indicates the coordinate point where a linear object begins.
end intrinsic coordinate
Indicates the coordinate point where a linear object ends.
is switchable
Indicates if a signal can be switched to show different messages or if it is a static panel.
relative position
Indicates the position of an object relative to the linear coordinates of the associated topological object.
linear coordinate
Indicates the position of an object within a linear positioning system. For example, relative to a national railway line.
IM code
Infrastructure Manager means any body or undertaking that is responsible in particular for establishing and maintaining railway infrastructure or a part thereof. The Code is a unique identifier for the Infrastructure Manager and it shall be verified on national level.
track id
Unique track identification or unique track number within a Section of Line.
op name
Name of an Operational Point.
platform id
Unique platform identification or number within an Operational Point.
siding id
Unique siding identification or number within an Operational Point.
rinf index
Index code used in the original definition of a parameter in RINF.
eratv index
Index code used in the original definition of a parameter in ERATV.
TEN classification
Indicates the related TEN (trans-European network).
TEN GIS identity
Indication of the GIS identity (GIS ID) of the section of TEN-T database to which the track belongs.
line category
Classification of a line according to the INF TSI.
freight corridor
Railway Freight Corridor that the line is designated to.
profile number for swap bodies
Coding for combined transport with swap bodies as defined in UIC Code.
profile number for semi-trailers
Coding for combined transport for semi-trailers as defined in UIC Code.
specific information
This parameters allows the IM to provide plain text with specific information about the track.
has ballast
Specifies whether track construction is with sleepers embedded in ballast or not..
load capability
A combination of the line category and speed at the weakest point of the track.
national load capability
National classification for load capability.
high speed load model compliance
Compliance of structures with the High Speed Load Model (HSLM).
structure check location
Railway location of structures requiring specific checks.
structure check document
Document with the procedure(s) for static and dynamic route compatibility checks.
static axle load in working order
Static axle load in working order.
static axle load under normal payload
Static axle load under normal payload.
static axle load under exceptional payload
Static axle load under exceptional payload.
design mass in working order
Design mass in working order.
design mass under normal payload
Design mass under normal payload.
design mass under exceptional payload
Design mass under exceptional payload.
maximum design speed
Maximum design speed.
axle spacing
Position of the axles along the unit. a: Distance between axles; b: Distance from end axle to the end of the nearest coupling plane; c: distance between two inside axles.
permissible payload
Permissible payload for different line categories.
gauging profile
Gauges as defined in European standard or other local gauges, including lower or upper part.
gauging check location
Location of particular points requiring specific checks due to deviations from gauging. The location (generally the distance from the origin of the line to the centre) on a line is given in kilometres with decimals (precision of 0.001).
gauging traversal document
Document with the transversal section of the particular points requiring specific checks.
minimum vertical curve radius
Radius of the smallest vertical curve expressed in metres.
minimum convex vertical radius
Minimum vertical convex curve radius capability.
minimum concave vertical radius
Minimum vertical concave curve radius capability.
maximum altitude
Highest point of the section of line above sea level in reference to Normal Amsterdam’s Peil (NAP). The value of the parameter shall be given in metres, with tolerance of +/-100m.
has TSI train detection
Indication if there is any train detection system installed and fully compliant with the CCS TSI requirements.
train detection system type
Indication of supported types of train detection systems.
detection system specific check
Type of track circuits or axle counter to which specific checks are needed.
detection system specific check document
Document with the procedure(s) related to the type of track circuits declared in 1.1.1.3.7.1.2.
french train detection system limitation
Section with train detection limitation, specific for route compatibility check on French network.
TSI compliant max distance consecutive axles
Indication whether required distance between two consecutive axles is compliant with the TSI.
max distance consecutive axles
Indication of maximum permitted distance between two consecutive axles in case of TSI non-compliance, given in millimetres.
min distance consecutive axles
Indication of minimum permitted distance between two consecutive axles, given in millimetres.
min distance first and last axles
Indication of minimum permitted distance between first and last axles, given in millimetres.
max distance end train first axles
Indication of maximum distance between end of train and first axle, given in millimetres, applicable for both sides (front and rear) of a vehicle or train.
min rim width
Minimum permitted width of the rim, given in millimiters.
min wheel diameter
Minimum permitted wheel diameter, given in millimiters.
min flange thickness
Minimum permitted flange thickness, given in millimiters.
min flange height
Minimum permitted flange height, given in millimiters.
max flange height
Maximum permitted flange height, given in millimiters.
min axle load
Minimum permitted axle load, given in tons.
min axle load per vehicle category
Minimum permitted axle load per category of Vehicle, given in tons depending of the category of vehicle.
TSI compliant metal free space
TSI compliance of rules for metal-free space around wheels.
TSI compliant metal construction
TSI compliance of rules for vehicle metal construction.
TSI compliant ferromagnetic wheel material
TSI compliance of Ferromagnetic characteristics of wheel material required.
TSI compliant max impedance wheelset
TSI compliance of maximum permitted impedance between opposite wheels of a wheelset.
max impedance wheelset
The value of maximum permitted impedance given in ohm in case of TSI non-compliance.
TSI compliant sanding
TSI compliance of sanding rules to allow compatibility with track circuits. Too much sand brings the risk of not detecting trains in tracks equipped with track circuits.
max sanding output
Maximum amount of sand accepted on the track within value of sanding output for 30s, given in grams.
required sanding override
Indication whether possibility to activate/deactivate sanding devices by driver, according to instructions from the Infrastructure Manager, is required or not.
TSI compliant sand characteristics
TSI Compliance of rules on sand characteristics.
flange lube rules
Indication whether rules for activation or deactivation of flange lubrication exist.
TSI compliant composite brake blocks
TSI compliance of rules on the use of composite brake blocks.
TSI compliant shunt devices
TSI compliance of rules on shunt assisting devices.
TSI compliant RST shunt impedance
TSI compliance of rules on combination of RST characteristics influencing shunting impedance.
has axle box detector
Existence of trackside hot axle box detector (HABD).
hot axle box detector TSI compliant
Trackside HABD TSI compliant. Specific for the French, Italian and Swedish networks.
hot axle box detector identification
Identification of trackside HABD. Applicable if trackside HABD is not TSI compliant.
hot axle box detector generation
Generation of trackside HABD. Specific for the French Italian and Swedish networks.
hot axle box detector location
Railway location of trackside HABD. Applicable if trackside HABD is not TSI compliant.
hot axle box detector direction
Direction of measurement of trackside HABD. Specific for the French Italian and Swedish networks.
axle bearing condition monitoring
Axle bearing condition monitoring.
cant deficiency
Maximum cant deficiency expressed in millimetres defined as difference between the applied cant and a higher equilibrium cant the line has been designed for.
maximum permitted speed
Nominal maximum operational speed on the line as a result of INF, ENE and CCS subsystem characteristics expressed in kilometres/hour.
rail inclination
An angle defining the inclination of the head of a rail relative to the running surface.
maximum speed and cant deficiency
Combination of maximum speed and maximum cant deficiency for which the vehicle was assessed.
wheel set gauge
A single value expressed in millimetres that identifies the track and vehicle wheel set gauge.
minimum wheel diameter
Maximum unguided length of fixed obtuse crossings is based on a minimum wheel diameter in service expressed in millimetres.
wheelset gauge changeover facility
Wheelset gauge changeover facility.
TSI compliance for switches and crossings
Switches and crossings are maintained to in service limit dimension as specified in TSI.
has level crossings
Indication whether level crossings (including pedestrian track crossing) exist on the section of line.
acceleration allowed level crossings
Existence of limit for acceleration of train if stopping or recovering speed close to a level crossing expressed in a specific reference acceleration curve.
minimum horizontal radius
Radius of the smallest horizontal curve of the track in metres.
maximum braking distance
The maximum value of the braking distance [in meters] of a train shall be given for the maximum line speed.
gradient profile
Sequence of gradient values and locations of change in gradient.
maximum train deceleration
Limit for longitudinal track resistance given as a maximum allowed train deceleration and expressed in metres per square second.
has additional braking information
Availability by the IM of additional information as defined in 4.2.2.6.2 (2) Regulation XXX - OPE TSI.
additional braking information document
Electronic document available in two EU languages from the IM stored by the Agency providing additional information as defined in point (2) of point 4.2.2.6.2 of the Annex to Regulation XXX - OPE TSI.
emergency braking
Stopping distance and deceleration profile for each load condition per design maximum speed.
brake weight percentage
Brake weight percentage (lambda) or Braked mass.
thermal capacity TSI reference
Reference case of a TSI thermal capacity.
thermal capacity speed
Thermal capacity speed. If no reference case is indicated.
thermal capacity gradient
Thermal capacity gradient. If no reference case is indicated.
thermal capacity distance
Thermal capacity distance. If no reference case is indicated.
thermal capacity time
Thermal capacity time. If no reference case is indicated.
parking brake maximum gradient
Maximum gradient on which the unit is kept immobilised by the parking brake alone (if the vehicle is fitted with it).
magnetic braking
Use of magnetic brakes.
magnetic braking conditions document
Document with the conditions for the use of magnetic brakes.
magnetic brake prevention
Possibility of preventing the use of the magnetic track brake (only if fitted with magnetic brake)
eddy current braking
Use of eddy current brakes.
eddy current braking conditions document
Document with the conditions for the use of eddy current brakes.
eddy current brake prevention
Possibility of preventing the use of the eddy current track brake (only if fitted with eddy current brake)
minimum temperature
Minimum tempertaure allowed for unrestricted operation access, according to European standard.
maximum temperature
Maximum tempertaure allowed for unrestricted operation access, according to European standard.
has severe weather conditions
Climatic conditions on the line are severe according to European standard.
snow ice hail conditions
Snow, ice and hail conditions.
contact line system type
Indication of the type of the contact line system
energy supply system
Indication of the traction supply system (nominal voltage and frequency).
energy supply system TSI compliant
Indication if the traction supply system (nominal voltage and frequency) is fully compliant with TSI.
umax2
Umax2 for lines referred to in sections 7.4.2.2.1 and 7.4.2.11.1 of Regulation (EU)1301/2014. Specific for the French network.
maximum train current
Maximum current taken by the complete train (composition of one or more units) expressed in amperes.
has regenerative brake
Indication whether regenerative braking is permitted or not.
conditional regenerative brake
Regenerative braking allowed under certain conditions.
prevent regenerative brake use
Possibility of preventing the use of the regenerative brake (only if fitted with regenerative brake).
current limitation required
Indication of whether an on board current or power limitation function on vehicles is required.
has current limitation
Electric units equipped with power or current limitation function.
maximum standstill current per pantograph
Indication of the maximum allowable train current at standstill for DC systems expressed in amperes.
maximum contact wire height
Indication of the maximum contact wire height expressed in metres.
minimum contact wire height
Indication of the minimum contact wire height expressed in metres.
tsi pantograph head
Indication of which TSI compliant pantograph heads are allowed to be used.
contact strip material
Indication of which contact strip materials are permitted to be used.
phase separation
Indication of existence of phase separation and required information.
phase information
Required information on phase separation. Data is structured as: length [NNN] + switch off breaker [Y/N] + lower pantograph [Y/N]).
has system separation
Indication of existence of system separation.
system separation information
Required information on system separation. Data is structured as: length [NNN] + switch off breaker [Y/N] + lower pantograph [Y/N] +[CharacterString].
distance sign and phase
Distance between the signboard authorizing the driver to “raise pantograph” or “close the circuit breaker” after passing the phase separation and the end of the phase separation section. Specific for route compatibility check on French network.
permitted contact force
Indication of contact force allowed expressed in newtons.
raised pantographs distance and speed
Indication of maximum number of raised pantographs per train allowed and minimum spacing centre line to centre line of adjacent pantograph heads, expressed in metres, at the given speed.
automatic dropping device required
Indication of whether an automatic dropping device (ADD) required on the vehicle.
vehicle pantograph head
Pantograph head geometry (to be indicated for each energy supply system the vehicle is equipped for).
vehicle contact force
Mean contact force.
number of pantographs in contact with OCL
Number of pantographs in contact with the overhead contact line (OCL) (to be indicated for each energy supply system the vehicle is equipped for).
shortest distance between pantographs in contact with OCL
Shortest distance between two pantographs in contact with the OCL (to be indicated for each energy supply system the vehicle is equipped for; to be indicated for single and, if applicable, multiple operation) (only if number of raised pantographs is more than 1).
ocl type
OCL type.
has automatic dropping device
Automatic dropping device (ADD) fitted (to be indicated for each energy supply system the vehicle is equipped for).
tunnel identification
Unique tunnel identification or unique number within Member State.
cross section area
Smallest cross section area in square metres of the tunnel.
compliance with INF TSI
Compliance of the tunnel with INF TSI at the maximum permitted speed.
tunnel document reference
Reference to a document available from the IM with precise description of the tunnel.
has emergency plan
Indication whether emergency plan exists.
rolling stock fire category
Applicable rolling stock fire category for a tunnel.
national rolling stock fire category
Applicable national rolling stock fire category for a tunnel.
fire safety category
Fire safety category for tunnels.
diesel thermal allowed
Indication whether it is allowed to use diesel or other thermal traction in the tunnel.
area boarding aid
Information of the train access level for which the boarding aid can be used. Data is presented as the vertical difference that is overcome by the platform boarding aid in millimetres. The value “0” means that the platform is not equipped with a platform boarding aid.
assistance starting train
Indication of existence of equipment or staff supporting the train crew in starting the train.
platform height
Distance between the upper surface of platform and running surface of the neighbouring track. It is the nominal value expressed in millimetres.
supported platform height
Platform height for which the vehicle is de­signed.
ETCS infill line access
Indication whether infill is required to access the line for safety reasons.
ETCS infill
Information about installed trackside/on-board equipment capable to transmit infill information by loop or GSM-R for level 1 installation.
ETCS national packet 44
Indication whether data for national packet 44 applications is transmitted between track and train.
has ETCS restrictions conditions
Indication whether restrictions or conditions due to partial compliance with the CCS TSI exist.
ETCS optional functions
Optional ETCS functions which might improve operation on the line.
train integrity on-board required
Indication whether Train Integrity monitoring system (TIMS) is required to access the line for safety reasons.
ETCS system compatibility
ETCS requirements used for demonstrating technical compatibility.
ETCS M_version
ETCS M_version according to SRS 7.5.1.9.
has train integrity confirmation
Indication of on-board management system about completeness of the train information.
GSM-R version
GSM-R version installed lineside/on-board.
GSM-R active mobiles
Number of active GSM-R mobiles (EDOR) or simultaneous communication session on-board for ETCS Level 2 (or level 3) needed to perform radio block centre handovers without having an operational disruption.
GSM-R optional functions
Use of optional GSM-R functions which might improve operation on the line. They are for information only and not for network access criteria.
GSM-R additional network info
Any additional information on network characteristics or corresponding document available from the IM and stored by the Agency, e.g.; interference level, leading to the recommendation of additional on-board protection.
GPRS for ETCS
Indication if GPRS can be used for ETCS.
GPRS implementation area
Indication of the area in which GPRS can be used for ETCS.
uses group 555
Indication if group 555 is needed/used.
GSM-R network coverage
GSM-R networks covered by a roaming agreement
public network roaming
Existence of roaming to public networks.
public network roaming details
Details on roaming to public networks.
GSM-R no coverage
Indication if there is no GSMR coverage.
voice GSM-R network
Voice SIM Card GSM-R Home Network
data GSM-R network
Data SIM Card GSM-R Home Network
voice radio compatible
Radio requirements used for demonstrating technical compatibility voice
data radio compatible
Radio requirements used for demonstrating technical compatibility data
has other train protection
Indication if other train protection, control and warning systems in normal operation are installed lineside.
multiple train protection required
Indication whether more than one train protection, control and warning system is required to be on-board and active simultaneously.
protection legacy system
Indication of which class B system is installed
legacy radio system
Indication of radio legacy systems installed
flange lube forbidden
Indication whether the use of on-board device for flange lubrication is forbidden
red lights required
Indication of a sections where two steady red lights are required in accordance with Regulation (EU) 2019/773
is quiet route
Indication of a track being part of a route with noise restrictions
quieter route exempted country
Country where a vehicle may operate without noise restrictions
composite brake block retrofitted
Indicates if a vehicle's composite brake block is retrofitted
etcs level type
ERTMS / ETCS application level which expresses the possible operating relationships between track and train
etcs base line
ETCS baseline installed lineside/on-board
switch protect control warning
Existence of switch over between different protection, control and warning systems while running.
switch radio system
Indication whether a switch over between different radio systems and no communication system whilst running exist.
TSI mangnetic fields
Existence and TSI compliance of rules for magnetic fields emitted by a vehicle.
TSI traction harmonics
Existence and TSI compliance of limits in harmonics in the traction current of vehicles.
ETCS level for degraded situation
ERTMS / ETCS application level for degraded situation related to the track side equipment.
other train protection
Other train protection, control and warning systems for degraded situation.
tilting supported
Indication whether tilting functions are supported by ETCS.
local rules or restrictions
Existence of rules and restrictions of a strictly local nature.
local rules or restrictions document
Documents regarding the rules or restrictions of a strictly local nature available by the IM.
gradient
Maximum value of the gradient for stabling tracks expressed in millimetres per metre.
has toilet discharge
Indication whether exists an installation for toilet discharge (fixed installation for servicing trains) as defined in INF TSIs.
has external cleaning
Indication whether exists an installation for external cleaning facility (fixed installation for servicing trains) as defined in INF TSIs.
has water restocking
Indication whether exists an installation for water restocking (fixed installation for servicing trains) as defined in INF TSIs.
has refuelling
Indication whether exists an installation for refuelling (fixed installation for servicing trains) as defined in INF TSIs.
has sand restocking
Indication whether an installation for sand restocking exists (fixed installation for servicing trains).
has electric shore supply
Indication whether an installation for electric shore supply exists (fixed installation for servicing trains).
driving cabs
Number of driving cabs. For wagons the number of driving cabs is to be set to zero (0).
maximum speed empty
Maximum speed when empty.
wheel set gauge transformation method
Wheel gauge transformation method. Defined if more than one wheel gauges have been selected.
conditions train formation
Conditions of use regarding train formation.
maximum locomotives coupled
Maximum number of trainsets or locomotives coupled together in multiple operation.
number elements rake freight wagons
Number of elements in the rake of freight wagons (only for subcategory 'rake of freight wagons')
letter marking
meets requirement vehicle authorization
Type meets the requirements necessary for validity of the vehicle authorisation granted by one Member State in other MSs.
dangerous goods tank code
Dangerous goods for which the vehicle is suitable (tank code).
structural category
Structural category.
vehicles composing fixed formation
Number of vehicles composing the fixed formation (for fixed formation only). Note: the value is mandatory for all vehicle categories. If the vehicle is composed of only one car, the indicated value shall be '1'.
altitude range
Altitude range.
altitude range detail
Altitude range value for 'X' if value 'AX' is selected in altitude range.
quasi static guiding force
Quasi-static guiding force (if exceeds the limit defined in TSI or not defined in the TSI), given in kN.
total vehicle mass
Total vehicle mass (for each vehicle of the unit), given in kg.
mass per wheel
Mass per wheel, given in kg.
cant defficiency
Cant deficiency (maximum uncompensated lateral acceleration) for which the vehicle has been assessed. For dual gauge vehicles values for each gauge have to be indicated.
has cant defficiency compensation
Vehicle equipped with a cant deficiency compensation system (tilting vehicle).
maximum average deceleration
Maximum train deceleration given in m/s².
maximum brake thermal energy capacity
Maximum brake thermal energy capacity given in kJ
parking brake mandatory
All vehicles of this type must be equipped with a parking brake (parking brake mandatory for vehicles of this type).
parking brake type
Parking brake type (if the vehicle is fitted with it).
has parking brake
Indicates if a vehicle type has parking brake.
maximum service break
At maximum service brake: Stopping distance, Maximum deceleration, for the load condition 'design mass under normal payload' at the design maximum speed.
has wheel slide protection system
Indicates the presence of a wheel slide protection system.
has shunting restrictions
Indicates the presence of shunting restrictions.
loadng platform height
Height of loading platform (for flat wagons and combined transport), given in mm.
transportable on ferry
Indicates the suitability for transport on ferries.
end coupling type
Type of end coupling (indicating tensile and compressive forces).
flange lubrication fitted
Indicates if the vehicle type is fitted for flange lubrication.
has lubrication device prevention
Possibility of preventing the use of the lubrication device (only if fitted with flange lubrication).
energy supply max power
Maximum power (to be indicated for each energy supply system the vehicle is equipped for), given in kW.
catenary max rated current
Maximum rated current from the catenary (to be indicated for each electrical energy supply system the vehicle is equipped for), given in A.
energy meter installed
TSI conform energy meter for billing purposes installed on board.
pass-by noise level
Pass-by noise level given in dB(A).
reference pass-by noise level
Pass-by noise level was measured under reference conditions.
stationary noise level
stationary noise level given in dB(A).
starting noise level
starting noise level given in dB(A).
fixed seats
Number of fixed seats.
number of toilets
Number of toilets.
sleeping places
Number of sleeping places.
priority seats
Number of priority seats.
wheelchair spaces
Number of wheelchair spaces.
prm accessible toilets
Number of PRM accessible toilets.
wheelchair sleeping spaces
Number of wheelchair accessible sleeping places.
boarding aids
Description of any integrated boarding aids (if provided).
portable boarding aids
Description of any portable boarding aids if considered in the design of the vehicle for meeting the PRM TSI requirements.
ETCS equipment level
ETCS equipment on-board and its level.
ETCS national applications
ETCS national applications implemented (NID_XUSER of Packet 44).
train control switch over special conditions
Special conditions implemented on-board to switch over between different train protection control and warning systems. Given as combination of systems installed on board ('System XX'_'System YY').
ETCS on-board implementation
ETCS on-board implementation.
GSM-R sets in driving cab
Number of GSM-R mobile sets in driving cab for data transmission.
radio switch over special conditions
Special conditions implemented on-board to switch over between different radio systems. Given as combination of systems installed on board ('System XX'_'System YY').
voice operational communication implementation
Voice and operational communication implementation.
GSM-R radio data communication
GSM-R Radio Data communication on board and its Baseline.
ETCS data communication application
Data communication application for ETCS implementation.
maximum length vehicle nose
Maximum length of the vehicle nose.
ferromagnetic wheel material
Wheel material is ferromagnetic.
vehicle max sanding output
Vehicle Maximum sanding output, given in grams per second.
has sanding prevention
Possibility of preventing the use of sanding.
minimum vehicle impedance
Minimum vehicle impedance (between wheels and pantograph) (only for vehicles equipped for 1500V or 3000V DC).